12/1/2021 – Today the oil pan, oil pickup tube and oil pickup tube pan were removed. Also, the small dirt cover on the front of the engine that is also the slave cylinder mounting hole. Everything was removed and cleaned except the fasteners. They will be cleaned and kept separate for what I hope is an easy reinstallation. When the pan was removed there was a pile of trash in the bottom. Most of it was either plastic or silicone but there were two or three pieces of metal that appears to be aluminum. There was a similar pile on the screen to the oil pump pickup tube. This did not appear to be a type of trash that would have an effect on the life of the engine but still it should not have been there. Now to do some sanding, priming, painting and straightening. Then the parts will be stored until reinstalled on the new engine.