Stripped Threads

Fortunately, there is a fix for this, Heli coil inserts as seen on the tip of the black tool second from left in the picture.

If you use a long 21/64ths bit you don’t even have to remove the pan to make the fix. Pretty cool.

So, with a long drill bit, a Heli coil kit and the help of some 8-point sockets this job is easy and very effective as long as you can drill and tap a hole straight.

You simply drill the stripped-out hole to size to be tapped. Then tap the hole using the tap provided in the kit for the 5/16-24 UNF threaded insert. The kit tool is used to install the insert in the threaded hole. Then reinstall the original fastener.

The copper color around the bolt heads is a copper-based thread dressing

All bolts are now torqued properly so any seepage from the front is now doubtful. I may yet achieve a leak free TR6. Ok, stop laughing now.

Note! 8-point sockets are handy because as you will see, the thread tap and insert tool are square on the end. This type of socket is appropriate for square applications.

John Phillips

S5 Accordion Menu

EVENTS

<<  <  December 2024  >  >>
 Mo  Tu  We  Th  Fr  Sa  Su 
        1
  2  3  4  5  6  7  8
  9101112131415
16171819202122
23242526272829
3031     

Disclaimer

Welcome to greencountrytriumphs.com. The greencountrytriumphs.com website is comprised of various web pages operated by Green Country Triumphs. Greencountrytriumphs.com is offered to you conditioned on your acceptance without modification of the terms and conditions provided upon request. Your use of greencountrytriumphs.com constitutes your agreement to all such Terms.

Contact us for more info about our club.
GCT EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact us for more info about our club.